Alcohol is slightly less dangerous than ammonia, but similar PPE guidelines apply for maximum safety. Because ammonia is toxic, make sure to use appropriate personal protective equipment (PPE).The tinted film isn’t 100% impermeable, and will allow the chemical in to do its work. The most straightforward way to do this is to spray ammonia or 70% or 91% isopropyl alcohol directly onto the window film. This is a simple chemistry hack: Window tint adhesive is soluble in ammonia or alcohol, which means you can use those substances to break down the adhesive bond. You might need a razor scraper or plastic scraper to help, but adding more steam is usually enough.Ī Plastic Scraper Won’t Damage the Defroster or Antenna Grid. While continually applying steam to the exposed window and window tint, peel off the window film.Use your fingernail or utility knife to pick at the edge of the tint.Take care not to burn yourself with the hot steam. Work the steam over the entire window, not just one spot, to heat up the window tint and soften the adhesive.Protect the interior of your car with a plastic tarp or garbage bag and an old towel.Handheld steamers are cheaper, but the ones with the hose attachment make it easier to reach into the cramped areas of a rear sedan window. Obtain a clothing steamer, long extension cord, and a couple gallons of distilled water-some steamers may specify salt for maximum efficiency.The only drawback is the need to acquire a clothing steamer, which may or may not be useful in the rest of your life – it’s great for last-minute touchups on your Sunday best, club swag, or disinfecting the cat box. Hot steam will soften the adhesive, allowing the window tint to separate from the glass. īy far, the easiest way to remove window tint is to use heat, specifically via a steam cleaner. This Clothing Steamer has Multiple Uses, Such as Softening Old Window Film Adhesive.
0 kommentar(er)
